T3DSO3000

The T3DSO3000 oscilloscope has four-channel models with analog bandwidth options from 200 MHz to 1 GHz. It provides a maximum sampling rate of 5 GSa/s and a maximum storage depth of 250 Mpts in half-channel mode. It also includes two 5 GSa/s ADCs and two 250 Mpts memory modules. When all channels are enabled, the sampling rate of each channel is 2.5 GSa/s and the standard record length is 125 Mpts. When only one channel of each ADC is active, the maximum sampling rate is 5 GSa/s and the maximum record length is 250 Mpts. For ease of use, the most commonly used functions can be accessed through its user-friendly front panel design.

Feature

• 200 MHz, 350 MHz, 500 MHz, and 1 GHz bandwidths


• Sampling rates up to 5 GS/s


• Long Memory – Up to 125 Mpts/Ch (250 Mpts interleaved)


• 10.1-inch capacitive color TFT-LCD touch screen (1024 x 600)


• Includes serial bus decoders for I2C, SPI, UART, CAN, LIN, CAN FD, I2S, MIL-STD-1553B, FlexRay, SENT, and Manchester


• Includes Bode plot measurements from 10 Hz to 25 MHz using the T3DSO1000–FGMOD–A function/arbitrary waveform generator, or from 10 Hz to 120 MHz using the T3AFG120 arbitrary function generator


• Standard power analysis application to measure power quality, current harmonics, inrush current, switching loss, slew rate, modulation, output ripple, on/off, transient response, PSRR, efficiency


• Optional MSO – 16 digital channels. This adds mixed signal debugging to the T3DSO3000 oscilloscope series.


• Optional 25 MHz function/arbitrary waveform generator. 6 waveform types (sine, square, ramp, pulse, DC, noise) and 45 arbitrary waveforms


• Advanced triggers - Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video, Pass, and Serial


• Waveform capture rate up to 110,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode)


• Connectivity – Multiple interface types: USB host, USB device (USBTMC), LAN, trigger in/out

Download Specifications